How to distinguish the medical solid wood furniture from you

Hospitals choose high quality solid wood furniture when choosing hospital furniture, but with the increase of the cost of solid wood furniture, many illegal businesses choose inferior wood to deal with it and pretend to be solid wood to reduce costs. The market has also appeared a lot of solid wood plate replacement products, a wide variety of consumers in the choice is unavoidable to be flicker. So is it true that it is real wood furniture? Today, the small editor of the Yimei medical department gives us a few tricks.

Listen: knock around and listen to the echo.

If it is not medical solid wood furniture, it will be very boring to knock on, because it is not the solid wood or the composite board. The density of the composite plate is not uniform, so the sound gives us a sense of hearing.

Two check: take a closer look at the bending and wood lines

The radians and patterns of medical solid wood furniture can only be achieved by cutting, which will waste a lot of wood. So manufacturers will not adopt this method, so if there is a very large form of curvature, it is better for consumers to do professional identification. Another method of identification is to see whether the wood lines of both sides of the same position are consistent. In addition, some wood has specific surface features, and it is also a natural characteristic that is imitated.

Three touch: the wood grain is natural and free from seams

When you touch it, you can feel that the wood grain is clear and fluent. Small furniture can use wood texture to identify the quality, but if it is a large piece of furniture, it must be made of stitching, and the light is not accurate. And listen.

The four look: see whether the medical solid wood furniture is built with the whole solid wood

The first thing is to look at the wood and scar. For example, a wardrobe door looks like a pattern, so look at the position of the pattern change in the corresponding position on the back of the cabinet, if it corresponds well, it is a solid wooden door. Looking at the scar is also a good way to identify the pure wood: look for the location of the side of the scar and find out the corresponding pattern on the other side.

Five weigh: weigh the weight of the timber, generally divided into three levels

A lightweight dried paulownia wood, a heavyweight pine, basswood, Akiki etc.. The density of wood called soft weedtree in northern China (except pine outside) heavyweight, except mahogany, rosewood, rosewood and other hardwood, ash and birch and willow imported Eucalyptus are called hard wood, in wood furniture than particleboard, MDF furniture light some.